Length Options

Our Seat Belt Tag Not all belts in the marketplace meet acceptable standards. Every seat belt or safety restraint we offer has been thoroughly tested to meet or exceed SAE & FMVSS regulations. A certification tag sewn into the belt fabric may be required for DMV and OSHA inspections. All of our seat belts have a tag sewn in clearly stating the testing certification.

 

Our high quality lap style seat belts are sold per person, one set of belts for one person.

This is only one example of how to install this product. See our complete How To section for more.

1962 Ford Seat Belt How-to Lap Belts   for 62 Ford Galaxy This is a 62 Galaxy. In this car we only put lap belts in the back seat. Usually when we put belts in a car we do the whole car, but this customer just wanted lap belts in the back.

First you have to locate your mounting points. Make sure that there is room for the anchor plate on the bottom of the floor. And also that it will not interfere  with anything else.

This is the bottom of the floor. The anchor plates make sure the bolt will not pull through the floor in an accident.

 

Here is one side of one of the belts bolted in, now all we have to do is drill the hole for the other side and bolt that in too.

We drilled the hole for the other side of the belt and bolted it in. This picture is a close up of the fastening point of the belt.

Now were all done replacing the belts, and they look and work like new.